Fujitsu Eternus web GUI - Page 165

Chapter 7 Thin Provisioning Pool Management
7.2 Functions in the Action Area for Thin Provisioning
ETERNUS Web GUI User’s Guide
165
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
• Attention
Specify the attention threshold (%) for monitoring the TPP used capacity between 5
and 80.
Specify the Attention threshold so that "Warning" is larger than "Attention".
The "Attention" threshold can be omitted. When setting the "Attention" threshold, select
the checkbox.
→ A confirmation screen appears.
3 Click the [OK] button.
→ Modify Threshold starts.
4 Click the [Done] button to return to the [Thin Provisioning Pool] screen.
End of procedure
When "Warning" is not larger than "Attention", an error screen is
displayed.
• When changing a "Attention" threshold, select the checkbox and
then specify a new threshold.
• When omitting a "Attention" threshold, clear the checkbox.