Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
201
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Check the displayed contents, and click the [Start] button.
→ A confirmation screen appears.
5 Click the [OK] button.
→ SnapOPC+ session starts.
6 Click the [Done] button to return to the [Advanced Copy] screen.
An error screen appears in the following conditions:
• When the SnapOPC+ started in the copy source volume exceeds
the maximum number of generations per volume
• When the SnapOPC+ started in the copy source volume exceeds
the maximum number of copy sessions for the entire ETERNUS
DX Disk storage system
To Next Page
Loading...