Fujitsu Eternus web GUI - Page 237

Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
237
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Click the [OK] button.
→ Measurement of the round trip time starts. After measurement completes, the [Measure
Round Trip Time Result] screen appears.
3 Check the measured round trip time, and click the [Next] button.
→ A confirmation screen appears.
4 Click the [OK] button.
→ Setting the round trip time starts.