Fujitsu Eternus web GUI - Page 250

Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
250
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ The REC Buffer settings starts.
An error screen appears in the following conditions:
• The total capacity of the REC Buffer is larger than 8192MB
(512MB for ETERNUS DX90 S2, and 4096MB for ETERNUS
DX410 S2)
• The Box ID for the remote device has been changed
• The same remote Box ID has been selected both for "Send " and
for "Receive" as its usage
• When the usage of a REC Buffer is "Send" or "Receive", and its
path to the remote Box ID has been deleted
• A REC Buffer, which has already been deleted ("???" is displayed
in the "Remote Box ID" field), still exists
• When the setting contents of the REC Buffer has not been
changed
To change the remote Box ID, first specify "Unused" for the use of
the corresponding group. Then, click [Modify REC Buffer] again to
specify a new remote Box ID and other information in the
corresponding group.