Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
294
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
7 Select whether to enable or disable the path between a host and a CA port and
click the [OK] button.
• Checkbox to select a path
When enabling the path between a host and a CA port, select the checkbox.
When disabling the path between a host and a CA port, clear the checkbox.
→ A confirmation screen appears.
8 Click the [OK] button.
→ The modification of the host affinity starts.
An error screen appears in the following conditions:
• When the host interface of the host group and the CA type of the
port group do not match
• Note that CA for "FCoE" and "FC" is regarded as the same CA
type.
• When the selected "Port Group" or "LUN Group" does not exist
• When the selected "Host" or the "CA Port" does not exist
• When a host affinity with the same "Host Group", "Port Group"
and "LUN Group" settings already exists
• When the number of hosts exceeds the maximum number per
port
To Next Page
Loading...