Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
338
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ Renaming of the SAS host starts.
4 Click the [Done] button to return to the [Host] screen.
An error screen appears in the following conditions:
• When the SAS host name has not been entered
• When the SAS host name does not satisfy the input conditions
• When the entered SAS host name already exists (when one host
has been selected)
• When a suffix starting number is not entered (only when multiple
hosts have been selected)
• When the suffix starting number does not satisfy the input
conditions (only when multiple hosts have been selected)
To Next Page
Loading...