Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
343
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ Registration of the iSCSI port group starts.
• When a port that has the affinity mode enabled (On) is
selected, ports that have the affinity mode disabled (Off)
cannot be selected.
• When a port that has the affinity mode disabled (Off) is
selected, ports that have the affinity mode enabled (On)
cannot be selected.
• Up to eight ports can be selected.
An error screen appears in the following conditions:
• When the port group name does not satisfy the input conditions
• When the port group name has not been entered
To Next Page
Loading...