Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
346
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ Registration of the SAS port group starts.
An error screen appears in the following conditions:
• When the port group name does not satisfy the input conditions
• When the port group name has not been entered
An error screen appears in the following conditions:
• When the port group name overlaps with an existing port group
name (port group names cannot overlap with any other port group
names, irrespective of the CA types.)
• When the total number of ports has exceeded the maximum
number for the ETERNUS DX Disk storage system
• When no ports are registered in a port group, or when nine or
more ports are registered in a port group
• When the specified port does not exist in the ETERNUS DX Disk
storage system
• When the port mode of the selected port is other than "SAS"
• When there are ports of which affinity mode is enabled (On) and
disabled (Off) existing together
To Next Page
Loading...