Fujitsu Eternus web GUI - Page 388

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
388
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Click the [OK] button.
→ Deletion of the host response starts.
3 Click the [Done] button to return to the [Host Response] screen.
End of procedure
9.2.5.3 Modify Host Response
This function modifies host response settings.
For more details about setting the host response, refer to "User’s Guide -Server Connection-" for
each OS type.
The procedure to edit a host response is as follows:
Procedure
1 Select the host response to be modified, and click [Modify Host Response] in
[Action].
• When editing an active host response, stop the access from the host
group to which the host response has been assigned.
• If an appropriate host response is not configured to the host affinity, the
path may not be switched correctly or the volume may not be
recognized correctly.
• When customizing the host response, make sure to understand the
setting parameters and create the host response with careful attention.
• The recommended pattern and the default setting of the host response
cannot be modified.
• Add host responses to the host affinities using the procedure in "9.2.1.1
Create Host Affinity" (page 283) or "9.2.1.3 Modify Host Affinity" (page
290).
• Refer to "9.2.5.1 Add Host Response" (page 381)
to add host
responses.