Chapter 10 Component Management
10.2 Functions in the Action Area for Component
ETERNUS Web GUI User’s Guide
439
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
The procedure to register a Dedicated Hot Spare is as follows:
1 Select a drive that is to be used as a Dedicated Hot Spare and click [Assign
Dedicated HS] in [Action].
2 Select which RAID group to use the selected drive as a Dedicated Hot Spare for
and click the [Assign] button.
→ A confirmation screen appears.
3 Click the [OK] button.
→ Registration of the Dedicated Hot Spare starts.
4 Click the [Done] button to return to the [Disks] screen.
To Next Page
Loading...