Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
518
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ The parameter settings of log transmission (Automatic Log Transmission) are updated
in the device.
4 Click the [Done] button to return to the [Remote Support] screen.
■ Immediately Send Log Manually
In this screen, send log manually and immediately.
1 Click [Setup Log Sending Parameters] in [Action].
To Next Page
Loading...