Fujitsu Eternus web GUI - Page 59

Chapter 5 Volume Management
5.1 Volume Status
ETERNUS Web GUI User’s Guide
59
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
The following items are displayed in the Main area:
• No.
The volume number is displayed. The volume number is allocated when a volume is created
from the smallest unused decimal number in ascending order.
• Name
The volume name is displayed. Clicking this item displays the [Volume] screen.
• Status
The volume status is displayed. When the volume status is normal, "Available" is displayed.
Refer to "B.2 Volume Status" (page 613)
for detailed information of volume status.
• Type
The volume type is displayed.
- Standard
Standard volumes and volumes that are used for general operations
- SDV
Snap Data Volume
- SDPV
Snap Data Pool Volume
- TPV
Thin Provisioning Volume
• Capacity
The volume capacity is displayed.
• RAID Group No.
The RAID group number to which the volume belongs is displayed. A "-" (hyphen) is
displayed when the volume type is "TPV".
• RAID Group Name
The RAID group name to which the volume belongs is displayed. A "-" (hyphen) is displayed
when the volume type is "TPV".
• Thin Provisioning Pool No.
The Thin Provisioning Pool number to which the volume belongs is displayed. A "-" (hyphen)
is displayed when the volume type is other than "TPV".
• Thin Provisioning Pool Name
The Thin Provisioning Pool name to which the volume belongs is displayed. A "-" (hyphen) is
displayed when the volume type is other than "TPV".
• Encryption
The encryption status is displayed.
- CM
A volume that is encrypted by CM
- Disabled
A volume that is not encrypted (plain text volume).