Fujitsu Eternus web GUI - Page 66

Chapter 5 Volume Management
5.1 Volume Status
ETERNUS Web GUI User’s Guide
66
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
The following items are displayed in the Main area:
• No.
The volume number is displayed.
• Name
The volume name is displayed.
When the volume is concatenated by LUN concatenation, "Volume name (n/m)" (n: nth
volume, m: number of concatenated volumes) is displayed.
• Type
The volume type is displayed.
- Standard
- SDPV
- SDV
- TPV
• Error LBA
The start position of the bad sector information in the volume is displayed using the Logical
Block Address (LBA).
- When bad sector information is detected in the TPV: "-" (hyphen)
- When the "Error Type" is "discrete": "-" (hyphen)
• Error LBA Count
The number of LBAs from Error LBA of the bad sector information in the volume is displayed.
- When bad sector information is detected in the TPV: "-" (hyphen)
- When the "Error Type" is "discrete": "-" (hyphen)
• Error Type
The number of bad sector information in the volume is displayed.
- When one bad sector information exists in the volume: "continuous"
- When multiple number of bad sector information exist in the volume: "discrete"
- For TPV, "discrete" is displayed regardless of the number of bad sector information.