Fujitsu Eternus web GUI - Page 76

Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
76
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
4 Click the [OK] button.
→ Volume creation starts.
5 Click the [Done] button to return to the [Volume] screen.
End of procedure
An error screen appears in the following conditions:
• When a name is not entered for "Name"
• When the name overlaps with an existing volume name for
"Name"
• When the capacity is not specified for "Capacity"
• When the capacity that is specified for "Capacity" exceeds the
maximum capacity that can be created
• When the SDPV capacity that is specified for "Capacity" is not a
multiple of the SDPE capacity (1GB/2GB/4GB)
• When the number of volumes that is specified for "Number of
Volumes" exceeds the maximum number of volumes that can be
created
• When free space in the RAID group or TPP is insufficient