EasyManua.ls Logo

Fujitsu PRIMERGY CX2550 M1 - Preliminary Steps

Fujitsu PRIMERGY CX2550 M1
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
148 Upgrade and Maintenance Manual CX2550 M1
System board and components
Safety notes
V CAUTION!
The CMOS battery must be replaced with an identical battery or with
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For further safety information, please refer to section "Environmental
protection" in the PRIMERGY CX2550 M1 Operating Manual.
Ensure to insert the CMOS battery with the positive pole facing
up!
9.1.1 Preliminary steps
Perform the following procedures:
Ê Locate the desired server with the ID button.
Ê "Shutting down the server node" on page 39
Ê If applicable, remove all external cables from the server node.
Ê "Removing the server node from the server enclosure" on page 40

Table of Contents

Other manuals for Fujitsu PRIMERGY CX2550 M1

Related product manuals