Fujitsu PRIMERGY CX2550 M1 - Re-Installing the SATA DOM; Concluding Steps

CX2550 M1 Upgrade and Maintenance Manual 163
System board and components
9.2.3.3 Re-installing the SATA DOM
Ê Secure the SATA DOM module on the SATA DOM spacer with the nylon
screw as described in "Installing the SATA DOM board" on page 153.
9.2.3.4 Concluding steps
Perform the following procedures:
Ê "Installing the server node in the server enclosure" on page 50
Ê If applicable, reconnect all external cables.
Ê "Controls and indicators on the server node" on page 51
Ê "Enabling SVOM boot watchdog functionality" on page 72