Ê Restart the system and wait until the screen output appears.
Ê Press the [F2] function key.
Ê If a password is assigned, enter this password and confirm with the
[Enter] key.
The BIOS setup Main menu will be displayed on the screen.
Ê Select "Save Changes and Exit" or "Save Changes and Reset" on
Save & Exit menu.
Ê Confirm LED no flashing.
This information is only regarding to the change of CPU configuration.
There is no technical problem.
Ê "Updating or recovering the system board BIOS and iRMC" on page 61 (if
applicable)
Ê "Controls and indicators on the server node" on page 51
Ê "Enabling SVOM boot watchdog functionality" on page 72
10.2 Cooling pads on the memory modules
10.2.1 Basic information
I Before installing new memory modules prepare the memory modules
with the cooling pads.
Figure 97: Memory cooling pads
To Next Page
Loading...
