EasyManua.ls Logo

Fujitsu PRIMERGY CX2550 M1 - Irmc Microsd Card; Installing the Irmc Microsd Card; Preliminary Steps

Fujitsu PRIMERGY CX2550 M1
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
174 Upgrade and Maintenance Manual CX2550 M1
System board and components
9.4 iRMC microSD card
I The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web frontend.
For further information, please refer to the “ServerView embedded
Lifecycle Management (eLCM)” user guide.
9.4.1 Installing the iRMC microSD card
9.4.1.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 54
Ê "Shutting down the server node" on page 39
Ê "Removing the server node from the server enclosure" on page 40
Ê "Removing a controller from the riser module" on page 47
Upgrade and Repair Unit
(URU)
Average task duration:
5 minutes
Tools: tool-less

Table of Contents

Other manuals for Fujitsu PRIMERGY CX2550 M1

Related product manuals