CX2550 M1 Upgrade and Maintenance Manual 39
4 Basic hardware procedures
4.1 Shutting down the server node
Safety notes
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 27.
I This step is only required when upgrading or replacing non-hot plug
components.
Ê Inform the system administrator that the server node will be shut down and
put offline.
Ê Terminate all applications.
Ê Press the On/Off button either on the rear or on the corresponding front
panel to shut down the server node.
I If the system is running an ACPI-compliant operating system,
pressing the On / Off button will perform a graceful shutdown.
To Next Page
Loading...
