Ê "Using the Chassis ID Prom Tool" on page 82
Ê "Updating or recovering the system board BIOS and iRMC" on page 61 (if
applicable)
Ê "Verifying the system time settings" on page 75
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section "Looking up changed MAC / WWN addresses"
on page 80.
Ê After replacing the system board in a server running Linux OS, update the
MAC address of the onboard network controller in the related NIC definition
file as described in section "Updating the NIC configuration file in a Linux
environment" on page 77.
To Next Page
Loading...
