Fujitsu ScanSnap N1800 User Manual

163
Since the shared name is displayed on the windows of the scanner, it is
recommended to name the printer with an alias that indicates the contents of
the properties settings as follows.
D Follow the prompts on the window. The "Completing the Add Printer
Wizard" message indicates that the printer addition has completed. Press
the [Finish] button.
D The printer is added on the [Printers and Faxes] window.
7. Right-click the added printer and select [Properties].
D Printer properties appear.
8. Press the [Printing Defaults] button on the [Advanced] tab.
D The printing defaults window is displayed.
9. Select [Color] on the [Paper/Quality] tab, and press the [OK] button.
D Printing is set to [Color].
After this, if the printer set for color printing on the print server is added to the
scanner printer list, the user can specify to use this printer already set for color
printing.
For details about adding the printer to the scanner printer list, refer to
"Registering a
Network Printer (Network Tree)" (page 164)
or "Registering a Network Printer
(Network Path)" (page 167)
.

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g