4.17 Setting a Job Sequence
204
7. If [e-Mail] is selected for the job item in Step 6, perform settings related
to sending e-mail.
For details about setting values, refer to
"6.4 Sending the Scanned Data by e-Mail"
(page 309)
.
z Press the [Browse] button to set a different e-mail address from the [LDAP
List] window.
To filter the LDAP List, refer to
"Filtering the LDAP List" (page 209) for more
details.
z Press the [Name Format] button to specify a file name on the [File Names (e-
Mail)] window. For details about setting values, refer to
"4.10.3 Setting a File
Name Format for When Attaching Scanned Data to e-Mail" (page 140)
.
To Next Page
Loading...
