EasyManuals Logo

Fujitsu ScanSnap N1800 User Manual

Fujitsu ScanSnap N1800
543 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #234 background imageLoading...
Page #234 background image
5.4 Pre-settings for Using Central Admin Console
234
3. Press the [Download] button.
D Follow the instructions displayed on the window.
The following settings will be required. Determine the port number and protocol
to be used in advance.
z Port number for scanner communication
z Port number for Central Admin Console communication
After installation, the port number and protocol settings can be changed on the
Central Admin Console [Scanner Central Admin Server Settings] window.
D After installation is complete, restart the computer.
z Downloading is not possible while a scanner operation is in process.
z Do not close the Web browser or logout until installation is complete.
z Installation requires 700 MB of free disk space, which includes 200 MB
required to install SQL Server 2005 Express Edition.
z If the Central Admin Server is already installed, skip to "5.4.2 Installing the Central
Admin Console" (page 238)
.
z When installing the Central Admin Server over an older version of the software, all
of the old Central Admin system settings should be automatically reused. However,
as a precaution, it is still recommended that the old settings be backed up before
proceeding with the upgrade installation. To back up the Central Admin settings,
refer to
"5.17.1 Backing Up Central Admin Server Settings" (page 281).
z Make sure that the Central Admin Server date and time values are set correctly. If
the date/time difference between the values set in the server and actual values is
large, normal operation may not be possible.
z After the Central Admin Server software is installed, a Windows user account
(Account name: iSCentralAdmin) is added. This user is required for Central Admin
Server, therefore, do not change or delete the account.

Table of Contents

Other manuals for Fujitsu ScanSnap N1800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap N1800 and is the answer not in the manual?

Fujitsu ScanSnap N1800 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 356 mm
Output color depth24 bit
ADF scan speed (color, A4)20 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (color, A4)20 ipm
DisplayTFT
Scanner typeADF scanner
Product colorBlack, Grey
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Fax, File, FTP, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Maximum duty cycle12000 pages per month
Daily duty cycle (max)2000 pages
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Auto document feeder (ADF) input capacity50 sheets
SafetyLDAP, LDAPS, FTPS, HTTPS
Cabling technology10BASE-T, 100BASE-TX
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage100-240 V
Power supply typeAC
Power consumption (off)0.5 W
Power consumption (standby)15 W
Power consumption (typical)50 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Depth226 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals