Name: Fujitsu ScanSnap N1800
Brand: Fujitsu
Rating: 5 (1 reviews)

To Next Page

To Previous Page

235

z For details about the operating environment required for installing the Central

Admin Server software, refer to

"1.4.3 Requirements for Central Admin Server"

(page 48)

z When installing the Central Admin Server software, the same necessary pre-

settings before logging in with the Admin Tool are required. For details, refer to

"4.2.2 Setting up for Administrator Access via the Admin Tool" (page 80).

z To install the Central Admin Server software on Windows Server 2008, login as an

administrator. Do not install with Administrators group rights.

z If the following error message appears, installation was not successful.

An installation package for the product Microsoft SQL Server Native Client

cannot be found. Try the installation agent using a valid copy of the installation

package 'sqlncli.msi'.

In this case, uninstall "SQL Server Native Client". Then, try installing the Central

Admin Server software again.

z If the installation process fails and the following error message appears, stop the IIS

service and re-start manually. Then, re-install the Central Admin Server software.

The installation process was canceled because the system was busy. Try

restarting the Installation Wizard again later.

z If the following error message appears in Windows Server 2008, check that IIS

Management Console is installed. If IIS Management Console is not installed,

select and install IIS Management Console in [Role Services].

Installation requires that the IIS Management Console be installed.

Refer to the manual for details.

To select the role services for IIS, point to [Administrative Tools] - [Server Manager],

select Web Server (IIS) in [Roles Summary].

z In order to use HTTPS for communication to a scanner, or computer installed with

Central Admin Console software, a self-signed certificate is automatically imported

on the Central Admin Server. However, it is recommended that a formal certificate

be installed manually. For details, refer to

"Importing the Certificate" (page 237).

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS