301
2. Open the carrier sheet and insert the document.
Align the fold with the right edge of the Carrier Sheet so that the document fits into
the Carrier Sheet at the upper corner.
3. With the front side of the carrier sheet face down, place the part of the
printed black and white pattern downward, and load it in the ADF paper
chute.
When loading the carrier sheet, move the side guides to lock the carrier sheet in
place.
z When placing the carrier sheet with the printed black and white pattern to be at the
top, the front of the carrier sheet has the thick vertical line at the right side.
z If [Face-up] is selected on the [Document Feed Direction] window, align the fold
side with the right edge of the carrier sheet so that the document fits into the carrier
sheet at the lower corner.
To Next Page
Loading...
