GE MEDICAL SYSTEMS - KRETZTECHNIK RAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
7-32 Section 7-8 - Error Messages
Thickness mismatch xx - GIP xx restart 3D (go to 2D); restart the system
UI_BBC_Wnd::vSet() has an wrong ImageType restart the system
UI_BBC_Wnd::vSet() will change from eB_Wnd to wrong
ImageType
restart the system
UI_BBC_Wnd::vSet() will change from eBBC_Wnd to wrong
ImageType
restart the system
UI_Manager::vDestroyWnd: dynamic cast to UI_MMC_Wnd*
failed
restart the system
UI_Manager::vDestroyWnd: dynamic cast to UI_PW_Wnd*
failed
restart the system
UI_Manager::vHRS_Execute multiple call restart the system
Unable to save... restart the system
undefined CW ADC_Clk-Teiler restart the system
Unknown Error load volume files from other storage medium
unknown Xilinx-Version restart the system
unrecordable disc in drive try again with another disk
Unsupported color mode restart the system
Verify error (Error while checking backup data.)
Backup data are probably damaged.
Try again or load another backup.
ViewerConMngr::vAssembleCF_DFE: attempt to get
ECG_Consumer_2D- or ECG_Draw_2D-Block from
ECGViewer Objects failed!!
restart the system
ViewerConMngr::vAssembleM_DFE: attempt to get
ECG_Consumer_2D- or ECG_Draw_2D-Block or ECG-
CalcHR-Block from ECGViewer Objects failed!!
restart the system
Volume_dB Out Of Range press ok and save this user-setting once again
WMF_KoefBlock: SamplePRF too big restart the system
XTD - pucBackScaledBImage: Memory allocation failed restart the system
XTD - pucDSCBImage: Memory allocation failed restart the system
XTDTrackballCtrlState::No frame to trackball position found,
internal failure!!
restart the system
Error Messages Actions