GE Voluson i BT06 - Page 159

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 3 - Setup Instructions 3-89
3-7-4 Printer Installation manually (cont’d)
10.)Use the BROWSE
button to search the Printer Driver path (R:\system\periph\xxxx).
11.)Click OPEN
. Select the “xxx.inf” file and click OPEN again.
12.)Verify the selected Printer Driver path and confirm with OK
.
13.)Select the manufacturer and model of your printer and confirm with the NEXT
button.
14.)Assign a name, decide if printer should be used as default printer and confirm with NEXT
.
NOTE: If the “Printer Sharing” window appears, select ‘Do not share this printer‘ and confirm with NEXT
.
Figure 3-110 Select Printer Driver path (R:\system\periph\....) / verify selected Printer Driver path
Figure 3-111 Assign name
R:\system\periph\SonyUP-D897