GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 3 - Setup Instructions 3-115
3-11-1-8 Network Profiles
1.) Connect the Wireless Network adapter as described in Section 3-5-4 on page 3-43 or connect the
network cable.
2.) Press the UTILITIES
key on the keyboard once to display the Utilities menu.
3.) Select SYSTEM
and then open the NETWORK page on the System Setup desktop screen.
4.) Click the NETWORK PROFILES
button.
5.) To start using Network Profiles, set the Use Network Profiles option in the upper section.
6.) The currenty used profile is displayed in the Current Profile textbox.
7.) In the Default Profile section click the checkbox next to the profile name which should be active
from boot-up. If no default is set, the system requests the desired network profile everytime.
• Click the NEW
button to set up a new profile.
Specify a name for the Network Profile in the Profile Name textfield. There are two options:
* Current Settings: The current Network Setup of the system is stored in the Network Profile.
* The dropdown field lists all stored Network Profiles. Choose this option and the desired source
profile to copy the settings to the new profile.
Click OK
to save the Network Profile or click CANCEL to abort the operation.
• Click the RENAME
button to rename the highlighted Network Profile.
• Click the SWITCH TO
button to change the currently active network settings to the ones stored in
the highlighted Network Profile.
• Click the DELETE
button to delete the highlighted Network Profile.
• Click the OK
button to confirm changes.
• Click the CANCEL
button to abort the operation.
For more information follow the instructions in the Basic User Manual of the Voluson i / Voluson e.
Figure 3-134 Network Profiles
Figure 3-135 Add Network Profile
To Next Page
Loading...
