GE Voluson i BT06 - Replacement of the Top Shelf Bottom Rear Cover; Manpower; Tools; Preparations

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-73
8-20-13 Replacement of the Top Shelf Bottom Rear Cover
8-20-13-1 Manpower
One person, 10 minutes
8-20-13-2 Tools
Phillips screwdriver 1
8-20-13-3 Preparations
1.) Power Off/Shutdown the system as described in Section 3-6-3 on page 3-72.
8-20-13-4 Top Shelf Bottom Rear Cover - Removal Procedure
1.) Put away the lever complete.
2.) Screw off the 5 screws and carefully remove the Top Shelf Bottom Rear Cover.
8-20-13-5 Top Shelf Bottom Rear Cover - Installation Procedure
1.) Place the new Top Shelf Bottom Rear Cover and fasten it with the 5 screws.
2.) Place the complete lever at its original position.
Figure 8-96 unscrew the 5 screws