GE Voluson i BT06 - Replacement of the Cover Bottom; Manpower; Tools; Preparations

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-48 Section 8-19 - Replacement of the Dock Cart Components
8-19-4 Replacement of the Cover Bottom
8-19-4-1 Manpower
One person, 10 minutes
8-19-4-2 Tools
Phillips screwdriver 1
8-19-4-3 Preparations
none
8-19-4-4 Cover Bottom - Removal Procedure
1.) For unlocking, turn the 2 quick release devices below the Cover Bottom 90°.
2.) Remove the Cover Bottom.
3.) Screw off the 2 screws on the back side and remove the Cover Bottom. .
8-19-4-5 Cover Bottom - Installation Procedure
1.) Place the new Cover Bottom on the original position.
2.) Fasten the 2 screws.
3.) For locking, turn the 2 quick release devices below the Cover Bottom 90°.
Figure 8-65 turn quick release devices 90°
Figure 8-66 screw off the screws on the back side
quick release
devices