EasyManua.ls Logo

GE Voluson i BT06 - Bluetooth Module and Antenna; Cardbus Interface; LCD Interface Block; Wireless Network Adapter

GE Voluson i BT06
516 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-23
5-4-3-2 LCD Interface Block
The interface to the LCD is via the LCD JILI interface, designed to provide the following:
- A generic interface to LCD panels
- Backlight illumination control
- Backlight ON/OFF control
- Supports LVDS interface
5-4-3-3 CardBus Interface
The PCMCIA slot supports a single type-II or a single type III Card.
The CardBus controller and Power Interface switch supports hot-plug capability.
5-4-4 Bluetooth Module and Antenna
The Bluetooth Module and Antenna enable the Voluson i / Voluson e portable ultrasound system to
operate in a wireless LAN network, which enables the system to connect to external applications, to
save or retrieve data from other network clients.
The Bluetooth module is provided through the upper USB port, using an USB-to-Bluetooth adaptor.
5-4-5 Wireless Network Adapter
The Voluson i / Voluson e has wireless capabilities using the Cisco Aironet Wireless LAN Adapter via
the PCMCIA port.
5-4-6 Wireless Network Interface
The Voluson i / Voluson e supports a Wireless Network Interface based on industry standards to provide
easy-to-use and compatible high-speed wireless connectivity. For details regarding installation, refer to
Section 3-5-4 "Connecting the Wireless Network Adapter/Interface" on page 3-43.
The Wireless Network Interface provides a mobile network connection to the local area network.

Table of Contents

Related product manuals