GE Voluson i BT06 - Replacement of the Probe Holder Insert

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-61
8-20-2 Replacement of the Probe Holder Insert
8-20-2-1 Manpower
One person, 5 minutes
8-20-2-2 Tools
none
8-20-2-3 Preparations
none
8-20-2-4 Probe Holder Insert - Removal Procedure
1.) Pinch together the latches.
2.) Remove the Probe Holder Insert.
8-20-2-5 Probe Holder Insert - Installation Procedure
1.) Place the new Probe Holder Insert at its original position.
Figure 8-81 pinch together the latches