GE Voluson i BT06 - Change Color Profil

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
6-4 Section 6-3 - LCD Display (Monitor) Adjustment
6-3-3 Change Color profil
1.) Press the UTILITIES key on the alphanumeric keyboard.
2.) Select the SYSTEM
item from the Utilities menu on the left side of the screen.
3.) Select the SERVICE
page.
4.) Type in the password SHE and click ACCEPT
.
5.) In the box "LCD Panel" select appropriated LCD Gamma Table.
NOTE: Select “A_LG” when LCD-Display of GPD1-1a is used.
Select “C_AUO” when LCD15” AUO G150XG01 and GPD5 or GPD6 is used.
Select “D_AUO” when LCD15” AUO G150XTN05.0 and GPD7 is used.
6.) Exit System with SAVE&EXIT
.
Figure 6-3 select correct LCD Panel