GE Voluson i BT06 - Section 4-7 Peripheral Checks

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 4 - Functional Checks 4-39
Section 4-7
Peripheral Checks
Check that peripherals work as described below:
4-7-1 Power Supply Adjustment
There are no adjustments on the power supplies. The DC Power is self-regulated. If a voltage is outside
the specified range, it means that something is wrong, either with the power supply itself or with a
component connected to that specific power outlet.
Table 4-12 Peripheral Checks
Step Task to do Expected Result(s)
1
Press the FREEZE
key. Stop image acquisition.
2
Press the P1
, P2 and/or P3 key on the Control Panel.
The image displayed on the screen is printed, saved or
exported, depending on the key assignment configuration