GE Voluson i BT06 - Bluetooth Deskjet - Printer Settings

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
3-96 Section 3-7 - Printer Installation
3-7-5-4 Bluetooth Deskjet - Printer Settings
1.) Call up the ‘Printer Properties’; operation see: Section 3-7-5 "Adjustment of Printer Settings" .
2.) Select the
GENERAL page and click the PRINTING PREFERENCES... button.
3.) Select the
PAPER/QUALITY page and select the adequate paper size.
4.) For saving the adjusted paper size settings click APPLY
and then OK.
5.) In the next window, click OK
again.
Finally close the ‘Printers’ -window with the close button and exit System Setup with SAVE&EXIT
.
6.) Assign the Deskjet printer as Report Printer; see: Section 3-7-6 "Printer Remote Control Selection"
on page 3-97.
7.) Print report page(s) containing measurements.
For operation see Basic User Manual of Voluson i / Voluson e.
8.) Turn off the system!
CAUTION
!! CAUTION:
The Bluetooth Connection Set as well as the color printer MUST NOT be installed by the user!
For installation please contact your local distributor or GE service representative.
Figure 3-120 Paper/Quality page