GE Voluson i BT06 - Page 356

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-14 Section 8-2 - System Software - Installation/Upgrade Procedure
8-2-2-4 Preparations (cont’d)
1.) Press the UTILITIES
key on the keyboard once to display the Utilities menu.
2.) Select the SYSTEM
item from the Utilities menu - which is displayed on the left side of the screen.
3.) Select the
SYSTEM INFO page on the System Setup desktop screen to see which Software/Hardware
version is installed in the unit.
Figure 8-16 Version check
currently installed Ultrasound
Application Software version
Date of Factory Settings