GE Voluson i BT06 - Page 406

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-64 Section 8-20 - Replacement of the Voluson Station Components
8-20-5 Replacement of the Probe Holder for Endocavity Probes
8-20-5-1 Manpower
One person, 5 minutes
8-20-5-2 Tools
none
8-20-5-3 Preparations
none
8-20-5-4 Probe Holder - Removal Procedure
1.) Carefully pull out the Probe Holder.
8-20-5-5 Probe Holder - Installation Procedure
1.) Place the new Probe Holder at its original position.
Figure 8-84 pull out the Probe Holder