GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 3 - Setup Instructions 3-23
Section 3-5
Connection of Auxiliary Devices
Table 3-9 below outlines the Voluson i/e hardware installation procedures described in the sub-sections.
Table 3-9 Connection Procedures
Sub-section Description Page Number
3-5-1
Connection and Usage of the optional Modo Cart 3-25
Attaching the Voluson i / Voluson e to the Modo Cart 3-25
Mounting small Peripherals (e.g., Black & White Printer) 3-27
Mounting large Peripherals (e.g., Color Printer) 3-28
3-5-2
Connection and Usage of the optional Dock Cart 3-29
Attaching the Voluson i / Voluson e to the Dock Cart 3-29
Installation of the Probe Mux Box 3-31
Installation of the Probe Shelf 3-32
Installation of the Top Probe Holder 3-32
Mounting small Peripherals (e.g., Black & White Printer) 3-33
Mounting large Peripherals (e.g., Color Printer) 3-34
3-5-3
Connection and Usage of the optional Voluson Station 3-35
Attaching the Voluson i / Voluson e to the Voluson Station 3-35
Installation Gel Condom Holder / Probe Holder for Endocavity Probe 3-37
Installation of the Additional Shelf Peripherals 3-38
Installation of the Console Bottom Shelf 3-38
Installation of the Cover BW Printer Shelf 3-38
Installation of the Patient Monitor 3-39
Installation of the Probe Mux Box Voluson Station 3-40
Mounting small Peripherals (e.g., Black & White Printer) 3-41
Mounting large Peripherals (e.g., VCR) 3-42
3-5-4 Connecting the Wireless Network Adapter/Interface 3-43
3-5-5 General Remarks and Hints when using external USB-Devices 3-44
3-5-6 Connecting the USB Hub 3-45
3-5-7 Connecting the DVD+R/RW Drive 3-46
3-5-8 Connecting the USB Flash Memory Stick 3-49
3-5-9 Connecting the external USB Hard disk (Handydrive) 3-50
3-5-10 Connecting the Black & White Printer 3-51
3-5-11 Connecting the Color Printer 3-52
3-5-12 Connecting the DeskJet Color Printer 3-53
3-5-13 Connecting the VCR (VideoCassette Recorder) 3-55
3-5-14 Connecting the DVD Recorder 3-60
To Next Page
Loading...
