VI
To use a media wider than 1,119 mm
When using the left grit roller, set the push roller to the position of 2 mm from the right edge (A in the figure
below).
Depending on the media size, adjust the position of the push roller of the long right grit roller.
Push roller
Media
2mm
Grit roller (Right-side longer)Grit roller (Left)
Adjust
(A)
Notes on the left grit roller
The left grit roller is not available in all locations.
It's not possible to set the right edge of the grit roller to a size greater than 8 mm. (There is a stopper.)
Please set the push roller to the position between 2 mm and 8 mm from the right edge of the grit roller.
Push roller
Grit roller
8 mm or more
Media
Push roller
Grit roller
2 mm to 8 mm
Media
OK NG
Notes on the crosscut
When setting the push roller to the left grit roller, the length of the crosscut will be as follows.
Please note the position you want to set the media.
• When the position to set the push roller is 2 mm to 4 mm or less from the right edge of the grit roller, the
crosscut from the left edge of the push roller will be 15 mm.
Push roller
Grit roller
2 mm to 4 mm or less
15 mm
Media
• When the position to set the push roller is 4 mm or more to 8 mm from the right-side of the grit roller, the
crosscut from the left-side of the push roller is 10 mm.
Push roller
Grit roller
4 mm or more to 8 mm
10 mm
Media
To Next Page
Loading...
