I
Preface
Thank you for choosing a Graphtec CE6000-120AP plotter. The CE6000-120AP plotters employ a digital
servo drive system to achieve high-speed and high-precision cutting. In addition to cutting with any
perforation pattern, the CE6000-120AP plotter can also be used as a pen plotter. To ensure high cutting
quality and optimal productivity, be sure to read this User's Manual thoroughly prior to use.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or
by any means, without the prior written permission of Graphtec Corporation.
(2) The product specifications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your
sales representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish
to make other comments or suggestions.
(4) Not with standing the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability
for damages resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or
registered trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Graphtec Corporation.
Instruction Manual
The Instruction Manual is included as a PDF on the CD-ROM, and gives detailed explanations on the
operation of this machine.
To Next Page
Loading...
