GRAPHTEC CE6000-120AP - 2.13 About Simple menu

2-43
Simple settings can be made from the menu in Simple menu.
The green Simple Lamp will come on when Simple mode is activated.
In the default screen, the [SIMPLE] key allows you to change between Simple menu and Normal menu.
Supplement
In Simple menu, TOOL, AXIS, AREA, TEST settings are not available..
You can choose the following settings on Simple mode's default screen.
P. 2- 21
See "How to Use Control Panel" for detailed information.
[COND/TEST] : Set "Tool Conditions". (See
P. 2- 29
: Selecting Tool Condition)
[COPY] : Make a copy. (See
P.4 -11
: Copy)
You can choose the following settings on the Simple mode menu screen.
MENU screen
(Simple menu)
[1] (MEDIA) : Set "FEED & CROSS CUT", "PAGE LENGTH", and "PAPER LOAD FUNCTION".
[2] (I/F) : Set "SELECT USER", and "RS-232C".
[3] (ADV) : Set "LENGTH UNIT".
That concludes the Simple mode menu screen setting explanation.
2.13
About Simple menu