7-6
It can be set to automatically feed and return the length of the page when the media is loaded and the media set
lever is raised.
This is equal to automatically perform the "Pre Feed" to prevent the shifting of the media.
P.4 -7
"Setting the number of pre feeds"
P.4 - 8
"Setting paper Ready time"
P.7- 4
"Perform Automatic Pre Feed When Cut Data is Received"
P.7- 8
"Setting Feed Speed for Media Set"
Supplement
This setting will be saved even if the power is shut off.
Operation
Supplement
Perform the settings in Normal menu.
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
3 Press the POSITION ( ) key.
MEDIA SETTING screen (2/3) is displayed.
4 Press the [4] key (INITIAL FEED).
INITIAL FEED screen is displayed.
5 Set the mode by pressing the [1] key (ON) or the [2] key (OFF).
7.3
Perform Automatic Pre Feed When Media
is Set (Initial Feed)
To Next Page
Loading...
