GRAPHTEC CE6000-120AP - 3.1 Raise or Lower the Tool

3-2
This is a function to raise or lower the tool (pen).
Operation
Supplement
Perform the settings in Normal menu.
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the [1] key (TOOL).
TOOL SETTING (1/3) screen is displayed.
3 Tool is raised or lowered every time the [1] key (TOOL UP/
DOWN) is pressed.
4 Press the [PAUSE/MENU] key.
It will return to default screen.
3.1
Raise or Lower the Tool