2-28
The auto media transfer and cross cut action performs cross_cuts in single page sections.
1. The length of a single page is determined in "page length" under "settings".
When in operation, it performs a cross_cut from the current tool position.
P.4 - 5
"Setting Length of the Page"
Operation
1 Press the [PAUSE/MENU] key in READY status.
MENU screen is displayed.
MENU screen
(Simple menu)
MENU screen
(Normal menu)
2 Press [4] key (MEDIA) in Normal menu, or [1] key (MEDIA) in
Simple menu.
MEDIA SETING screen is displayed.
MEDIA SETING screen
(Simple menu)
MEDIA SETING screen
(Normal menu)
3 Press the [1] key (FEED&CROSS CUT).
Auto media transfer and cross cut screen is displayed.
CAUTION
Pressing [1] or [2] key activates the tool
carriage. Take care to ensure that you do not
cut your fingers on the cutter blade.
4 Press [1] key (FEED&CROSS CUT) or [2] key (CROSS CUT)
to begin operation.
With "FEED&CROSS CUT," cross-cutting will begin after 1
page has been transferred.
"CROSS CUT" will start from the current tool position when
you press [2] key.
5 Press the [PAUSE/MENU] key.
It will return to default screen.
2.9
Auto media transfer and cross cut
To Next Page
Loading...
