GRAPHTEC CE6000-120AP - Display Length Unit Settings (LENGTH UNIT)

9-3
Display Length Unit Settings (LENGTH UNIT)
The coordinate values that appear on the display and the other parameters for various settings can be changed
to either meter or inch display.
Operation
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
MENU screen
(Simple menu)
MENU screen
(Normal menu)
2 Press the POSITION ( ) key (ADV.) in Normal menu, or
press the [3] key (ADV.) in Simple menu.
ADVANCE setting screen is displayed.
ADVANCE setting screen
(Simple menu)
ADVANCE setting screen
(Normal menu)
3 Press the [3] key (LENGTH UNIT) in Normal menu, or press
the [1] key (LENGTH UNIT) in Simple menu.
LENGTH UNIT setting screen is displayed.
4 Press the [1] key (METRIC) or the [2] key (INCH).
5 Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen.
6 Press the [PAUSE/MENU] key.
It will return to the default screen.