GRAPHTEC CE6000-120AP - Contents of Operation from [COND;TEST] Key

2-25
Contents of Operation from [COND/TEST] Key
Simple menu is the same as normal menu.
CONDITION screen (1-3) : (Normal mode)
Tool conditions are set in the setting screens displayed by the [COND/TEST] key.
Up to 8 CONDITION settings can be saved with different settings in numbers 1 through 8.
[COND/TEST]: This will clear the CONDITION screen and return to default screen.
P. 2- 29
See "2.10 Selecting Tool Condition" for the detailed tool condition.