GRAPHTEC CE6000-120AP - HP-GL Separatorr

8-9
Supplement
It will return to INTERFACE setting (2/3) screen
without changing the settings when you press
the POSITION (
) key (CANCEL).
6 Confirm the setting and press the [ENTER] key (SET).
Setting will be set and it will return to INTERFACE setting screen (2/3).
7 Press the [PAUSE/MENU] key.
It will return to default screen.
HP-GL Separatorr
Set the separator when using HP-GL
Reference
This setting will be saved even if the power is shut off.
Operation
Supplement
Perform the settings in Normal menu.
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the POSITION ( ) key (I/F).
INTERFACE setting screen (1/3) is displayed.
3 Press the POSITION ( ) key.
INTERFACE setting screen (2/3) is displayed.
4 Press [4] key (HP-GL SEPARATER).
HP-GL SEPARATOR screen is displayed.