GRAPHTEC CE6000-120AP - Page 166

8-10
Supplement
You can set "IN", "DF", "PS", "IW", "SC", "IP",
"SP", "NR", "PG", "AH", "AF", or "–".
5 Press the POSITION ( ) keys to change the current setting.
Supplement
It will return to INTERFACE setting (2/3) screen
without changing the settings when you press
the POSITION ( ) key (CANCEL).
6 Confirm the setting and press the [ENTER] key (SET).
Setting will be set and it will return to INTERFACE setting screen (2/3).
7 Press the [PAUSE/MENU] key.
It will return to default screen.