2-22
Indicator Lamp
SIMPLE lamp ............. A green light indicates Simple menu is on.
MENU lamp ................ A green light indicates MENU mode is on.
Reading the Screen (LCD)
Information reflecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function is displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the button is enabled.
Following items are displayed in the default screen.
This instruction manual will use Normal menu screens to demonstrate everything.
Display of setting condition
Command : GP GL : GP-GL Command
HP GL : HP-GL Command
Step size : 0.1 : 0.1 mm
0.05 : 0.05 mm (50 μm)
0.025 : 0.025 mm (25 μm)
0.01 : 0.01 mm (10 μm)
Rotate : R90 : Rotate 90°
Priority : MANUL : Manual priority
: PROGRA : Pogram priority
Sort : Sort ON : Display when sort is on
Prefeed : Pre FEED : Display when automatic media feed is on
Media set lever raised Media set lever lowered
Tool condition currently using
Corresponding button name of control panel
(Valid button is displayed in reverse)
Set condition of media (READY status: It will
display "READY" when the media is loaded)
Default Screen (Ready Screen)
To Next Page
Loading...
