GRAPHTEC CE6000-120AP - Setting the Step Size (GP-GL STEP SIZE)

10-4
Related to GP-GL Command
A useful chapter when using the GP-GL command.
Setting the Step Size (GP-GL STEP SIZE)
The distance to travel with 1 step can be changed. Match the setting value of the application to be used.
Operation
Supplement
Perform the settings in Normal menu.
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2 Press the POSITION ( ) key (I/F).
INTERFACE setting screen (1/3) is displayed.
3 Press POSITION ( ) key.
INTERFACE setting screen (2/3) is displayed.
4 Press the [1] key (GP-GL STEP SIZE).
GP-GL STEP SIZ setting screen is displayed.
5 Press the [1] key (0.100 mm), the [2] key (0.050 mm), the [3]
key (0.025 mm), or the [4] key (0.010 mm).
6 Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (2/3).
7 Press the [PAUSE/MENU] key.
It will return to the default screen.